INNOVATIVE PRODUCTS EXHIBITIONThe following companies will exhibit as part of the Innovative Products Exhibition at the ETV and SBIR Programs Regional Technology Workshop:Boreal Laser Technology: GasFinder 2.0 Tunable Diode Laser (TDL) Open-Path Air Quality Monitor EPA Environmental Technology Verification (ETV) Program Vendor Contact: Hamish Adam Spruce Grove, Alberta, Canada Phone: (403) 271-2007 E-mail: hadam@boreal-laser.com Web Site: www.boreal-laser.com C Tech Development Corporation Technology: Environmental Visualization System Pro (EVS-PRO) Decision Support Software EPA Environmental Technology Verification (ETV) Program Vendor Contact: Thomas J. Cook Laie, Hawaii Phone: (808) 447-9751 E-mail: tcook@ctech.com Web Site: www.ctech.com DzymeTech, Inc. Technology: Spot Test Kit for Leaded Paint and Dust EPA Small Business Innovation Research (SBIR) Program Vendor Contact: David Kellner Champaign, Illinois Phone: (217) 417-6445 E-mail: dkellner@dzymetech.com Web Site: www.dzymetech.com Emerson Process Management, Rosemount Analytical Liquid Technology: Model WQS Multi-Parameter Water Monitor for Drinking Water Distribution Systems EPA Environmental Technology Verification (ETV) Program Vendor Contact: Bonnie Brown Irvine, California Phone: (949) 757-8536 E-mail: bonnie.brown@emerson.com Web Site: www.railhome.com/liquid Engine Control Systems EPA Environmental Technology Verification (ETV) Program Vendor Contact: Kavitha Moorthy Newmarket, Ontario, Canada Phone: (905) 952-2438 E-mail: kamy@enginecontrolsystems.com Web Site: www.enginecontrolsystems.com Environnement S.A. Deutschland (previously bm becker messtechnik gmbh) Technology : AMESA® (Adsorption Method for Sampling Dioxins and Furans) Dioxin Emission Monitoring System for Incinerator Emissions EPA Environmental Technology Verification (ETV) Program Vendor Contact: Jurgen Reinmann Eschborn, Germany Phone: +49 6196 936 223 E-mail: j.reinmann@environnement-sa.com Web Site: www.amesa.eu HAPcontrol, LLC Technology: HAPcontrol Engineered Bio-Furniture System Volatile Organic Compounds Emission Control Technology EPA Environmental Technology Verification (ETV) Program Vendor Contact: Lew Daly Syracuse, New York Phone: (315) 422-7607 (Triad Technologies, Inc.) E-mail: ldaly@triadtec.com Web Site: www.hapcontrol.com (under construction) Hydro International Technology: Up-Flo™ Filter with CPZ Mix™ Filter Media In-Drain Treatment Device; Downstream Defender®, 6-foot Diameter Stormwater Treatment Technology EPA Environmental Technology Verification (ETV) Program Vendor EPA Small Business Innovation Research (SBIR) Vendor Contact: Gregg Drames Portland, Maine Phone: (207) 756-6200 E-mail: stormwaterinquiry@hil-tech.com Web Site: www.hydro-international.biz Industrial Test Systems, Inc. (ITS) Technology: Quick™, Quick II™, Quick™ Low Range, Quick™ Low Range II, and Quick™ Ultra Low II Test Kits for Analysis of Arsenic in Water; Cyanide ReagentStrip™ Test Kit for Detecting Cyanide in Water EPA Environmental Technology Verification (ETV) Program Vendor Contact: Robin Locklair Rock Hill, South Carolina Phone: (803) 329-9712 E-mail: rlocklair@sensafe.com Web Site: www.sensafe.com Met One Instruments, Inc. Technology: BAM 1020 Continuous Ambient Fine Particulate Monitor EPA Environmental Technology Verification (ETV) Program Vendor Contact: Michael Meyer Grants Pass, Oregon (Albany, New York) Phone: (518) 280-8733 E-mail: mbmeyer@metone.com Web Site: www.metone.com Physical Sciences, Inc. Technology: Compact Laser-Based Sensors for Remote Detection of Gases and Vapors EPA Small Business Innovation Research (SBIR) Program Vendor Contact: Mickey Frish Andover, Massachusetts Phone: (978) 738-8252 E-mail: frish@psicorp.com Web Site: www.psicorp.com Renewafuel, LLC Technology: Renewafuel Pelletized Wood Fuel for Biomass Co-Firing with Coal in Industrial Boilers EPA Environmental Technology Verification (ETV) Program Vendor Contact: James A. Mennell Cleveland, Ohio Phone: (612) 623-2360 E-mail: jmennell@renewafuelllc.com Web Site: www.renewafuelllc.com Strategic Diagnostics, Inc. Technology: RaPID Assay® Kit for Analysis of Atrazine in Water; Deltatox®, Microtox®, and RAPIDTOXKIT Rapid Toxicity Testing Systems; and D Tech, EnviroGard, and RaPID Assay System for Measurement of Polychlorinated Biphenyls (PCBs) in Soils and Solvent Extracts EPA Environmental Technology Verification (ETV) Program Vendor Newark, Delaware Phone: (302) 456-6789 E-mail: sales@sdix.com Web Site: www.sdix.com Testo, Inc. Technology: Model 350 Portable Emissions Analyzer for Determining Nitrogen Oxides and Combustion Emissions EPA Environmental Technology Verification (ETV) Program Vendor Contact: Craig McKim Sparta, New Jersey Phone: (862) 354-5001 E-mail: craig@testo.com Web Site: www.testo350.com Tetracore, Inc. Technology: BioThreat Alert® Test Strips and Enzyme-Linked Immunosorbent Assay (ELISA) Test Kits for Biotoxins in Water EPA Environmental Technology Verification (ETV) Program Vendor Contact: Brian Kijowski Rockville, Maryland Phone: (240) 268-5400 E-mail: bkijowski@tetracore.com Web Site: www.tetracore.com Thermo Scientific NITON Analyzers Technology: XL Spectrum Field-Portable Analyzer for Measurement of Metals in Soil; XL-300 Series, XL-700 Series, and XLt-700 Series X-Ray Fluorescence (XRF) Spectrum Analyzers for Measurement of Lead in Dust EPA Environmental Technology Verification (ETV) Program Vendor EPA Small Business Innovation Research (SBIR) Program Vendor Contact: Jon Shein Billerica, Massachusetts Phone: (978) 670-7460 E-mail: jon.shein@thermofisher.com Web Site: www.niton.com U.S. EPA Environmental Technology Verification (ETV) Program Contact: Abby Waits, EPA Phone: (513) 569-7884 E-mail: waits.abby@epa.gov Web Site: www.epa.gov/etv U.S. EPA Small Business Innovation Research (SBIR) Program Contact: James Gallup, EPA Phone: (202) 343-9703 E-mail: gallup.james@epa.gov Web Site: www.epa.gov/ncer/sbir GUIDELINES FOR EXHIBITORSExhibiting opportunities at the U.S. EPA ETV and SBIR Programs Regional Technology Workshop are limited to ETV-verified vendors and EPA SBIR awardees. If you meet these criteria and would like to exhibit, or if you have questions regarding your company's eligibility to exhibit, please contact Abby Waits, EPA, at (513) 569-7884 or waits.abby@epa.gov.The following guidelines and requirements are applicable for companies who have contacted EPA and received confirmation of exhibit space at the event. TABLETOP EXHIBIT SPACESExhibits will be located in the Atrium area on the 30th floor of the U.S. EPA Region 2 office. Exhibit space is limited to one tabletop sized exhibit or equivalent equipment/materials per vendor. [Note: full-size, free-standing exhibits/booths will not be accommodated due to space limitations.] Each exhibit space will be provided with one 6' table, two chairs and one standard electrical outlet (20 Amp/110 V) (if requested). Electrical needs should be specified on the Exhibit Confirmation Form. Internet access/hook-ups are not available.Exhibit space is free of charge. EPA recommends that exhibitors do not leave any valuable equipment unattended, as security will not be provided. REGISTRATION OF EXHIBIT PERSONNELAll exhibitors are required to register for the workshop. Registration for this event is free of charge. Please register by Monday, September 29, 2008. If you have any questions related to registration, please contact Angela Hays, SCG, at (301) 670-4990 or ahays@scgcorp.com.EVENT LOCATIONThe U.S. EPA ETV and SBIR Programs Regional Technology Workshop will be held from 8:00 AM to 5:00 PM on October 7, 2008, and from 8:30 AM to 12:45 PM on October 8, 2008, at the following location:U.S. Environmental Protection Agency, Region 2 Main Office 290 Broadway, 27th and 30th Floors New York, New York 10007-1866 Website: http://www.epa.gov/region2/ When arriving at the U.S. EPA Region 2 office, enter the building through the Broadway entrance. SECURITYAll visitors will need to present a federal- or state-issued form of identification (e.g., a state driver's license) upon arrival and pass through a metal detector when entering the U.S. EPA Region 2 office. Exhibit cases, boxes, and materials will need to go through an x-ray machine or be examined by hand. Visitors will be accompanied by an EPA escort to the 30th floor. Please be sure to identify when you will be arriving for set up on the Exhibit Confirmation Form so that we can provide this information to building security in advance.HOTELSFor information on local hotel accommodations, please see Hotel Info.DELIVERY OF EXHIBITS/DISPLAYSIf you plan to ship exhibit materials directly to the U.S. EPA Region 2 office, please send them to the following address:U.S. Environmental Protection Agency, Region 2 290 Broadway, 15th Floor Mailroom New York, New York 10007 Attn: Rodney Dorwin Phone: (212) 637-3390 IMPORTANT: Please put the following information on the OUTSIDE of your shipping container(s): EPA ETV/SBIR Workshop, Hold for Delivery until October 6 Your Name (Point of Contact) Organization or Company Name Company Address Company Phone Number Vendor materials should be shipped to the U.S. EPA Region 2 office for arrival between Monday, September 29 and Friday, October 3, 2008. You are responsible for tracking your own shipment and ensuring that it arrives at the event location. EXHIBIT SET UPExhibits may be set up on Monday, October 6, 2008, between 5:00 PM and 7:00 PM or on Tuesday, October 7, 2008, between 7:00 AM and 8:00 AM. All exhibits must be set up by 8:00 AM on October 7. In you plan to set up your exhibit on Monday, October 7, please arrive before close of business (before 5:30 PM) to avoid problems passing through security. After business hours (8:00 AM to 5:30 PM) vendors may not be allowed re-entry into the facility, so please remain in the U.S. EPA Region 2 office until your exhibit set up is complete.EXHIBIT STAFFINGThe exhibits will be open for public viewing from 8:00 AM until 5:00 PM on Tuesday, October 7, and from 8:30 AM until 1:00 PM on Wednesday, October 8. Please plan on staffing your exhibit at a minimum during the following times:October 7, 2008 Morning Registration - 8:00 AM to 8:30 AM Morning Break - 9:40 AM to 10:00 AM Afternoon Break - 3:00 PM to 3:30 PM October 8, 2008 Morning Registration - 8:30 AM to 9:00 AM Break - 12:45 PM to 1:00 PM EXHIBIT TEAR DOWNExhibits may be dismantled between 1:00 PM and 3:00 PM on Wednesday, October 8, 2008. All exhibitors will be responsible for dismantling their own exhibits. If you do not dismantle your exhibit and make your return shipping arrangements by 5:00 PM on October 8, your exhibit's return cannot be guaranteed.EPA is not responsible for any loss, damages, or theft of exhibit materials or other property of exhibitors or their representatives. EPA recommends that exhibitors do not leave any valuable equipment unattended, as security will not be provided. Exhibit Contact: Abby Waits U.S. EPA, Environmental Technology Verification Program 26 W. Martin Luther King Drive, MS 208A Cincinnati, Ohio 45268 Phone: (513) 569-7884 Fax: (513) 569-7680 Email: waits.abby@epa.gov Print Version  |
 |
|||||||||
|